Doosan DX470LCV Hydraulic Final Drive Motor

A1:12 mm; B:27 mm; A5:19.5 mm; N1:16 mm; H:89 mm; C0:7.88 kN; L3:51 mm; S:7.5 mm; d:25 mm; H2:51 mm;

L1:71 mm; H1:25 mm; s1:26.85 mm; J:190 mm; N:18mm; A1:42 mm; B:53.7 mm; C:52.5 kN; d:61.91 mm; G:R1/8";

N:15mm; G:M6x1; C0:20.8 kN; d:45 mm; A2:52.2 mm; L1:90 mm; L:108 mm; s1:24.6 mm; J:148 mm; J1:72 mm;

Characteristic outer ring frequency, BPF0:3.09 Hz; Radial clearance class:C3; Max operating temperature, Tmax:110 °C; rs min:2.1 mm; Nlim (grease):2,700 rpm; d:80 mm; D:170 mm; Static load, C0:86.5 kN; ra max:2 mm; da max:105 mm;

Designation of closed end cover:SCC206; Dz:70 mm; S:15.9 mm; B:38.1 mm; e:10 mm; A:31 mm; T max.:100 °C; J:100 mm; T min.:-20 °C; Recommended tightening torque for set screw:3.7 Nm;

L:165 mm; A1:13 mm; Designation of housing:FCE210-; A:25.5 mm; e:1 mm; T max.:100 °C; S:19 mm; A2:33.6 mm; Weight:2.27 kg; C0:23.2 kN;

H2:124 mm; L1:162 mm; L:260 mm; A:73 mm; A5:40 mm; N:48mm; N2:73 mm; H:198 mm; A2:54 mm; L3:157 mm;

G:M6x1; J:99 mm; T max.:100 °C; A:27 mm; S:14.3 mm; A2:35.7 mm; N:16mm; Weight:0.61 kg; Designation of bearing:UC205-14G2L4; H:130 mm;

H1:20 mm; Designation of housing:PH209N-; H2:157 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; L:190 mm; Weight:3.26 kg; H:105 mm; J:146 mm; N1:25 mm;

G:R1/8"; S:10.2 mm; A:40 mm; d:45 mm; A1:13 mm; N:14mm; C:31.85 kN; s1:20.6 mm; Designation of housing:FE209-; T min.:-40 °C;

D:80 mm; SW:4 mm; C1:6.3 mm; T min.:-20 °C; d:40 mm; Weight:0.68 kg; m:8 mm; C:21 mm; Recommended tightening torque for set screw:11.5 Nm; T max.:100 °C;

s1:33 mm; L1:85 mm; A:80 mm; C0:44.8 kN; G:M6x1; Designation of housing:P311-; Recommended tightening torque for set screw:27.1 Nm; T max.:200 °C; H1:30 mm; A1:51 mm;

Bearing Insert Material:Steel; Ball Grade:Class 10; Bearing Bore Shape:Round; Bearing Outer Ring Material:Steel; Seal Type:Shield; Anti-Rotation Pin:Yes; Self Aligning:Self Centering; Grease Type:DuPont Krytox GPL 20; Flinger Type:Standard; Brand:Baldor-Dodge;

Recommended tightening torque for set screw:3.7 Nm; N1:17 mm; H:33.3 mm; C:14 kN; L:139 mm; N:11mm; d:22.22 mm; A:36.5 mm; s1:24.2 mm; A1:24.5 mm;

Brand:SNR; db min:35.5 mm; D6:40.1 mm; Characteristic cage frequency, FTF:0.44 Hz; r1a max:0.6 mm; da min:35.5 mm; Da max:49.5 mm; rs min:1 mm; d:30 mm; B:13 mm;